Solid lubrication, WS2 coating production enterprises
Benefits and Main Advantages of WS2 in Plastic Industry
Advantages of WS2:
Reduce friction coefficient, reduce wear, occlusion, etc. There is no need to add oil to thimbles, sliders, inclined pins and the like in the mold, thus solving the problems of difficult painting, electroplating and the like caused by oil stains in the post-treatment of products. Reduce cycle time, allow the use of less pressure, prolong the service life of the mold, reduce maintenance and maintenance costs.
When WS2 is applied to the core, cavity, slide block, mandril and inclined pin of the mold, the adhesion/occlusion/wear/oil-free lubrication problem can be solved.
Benefits and Main Advantages of WS2 in Plastic Industry;
The film thickness is only 0.5 micron,
keeping the size of the substrate unchanged. As the friction coefficient is extremely low, the fluidity of the resin is increased.
Reduce the weight of parts The product is discharged more quickly without sticking Increase output value-more products can be produced per hour.
Reduce unqualified products Non-toxic,
non-corrosive and compatible with all other lubricating oils. Can be combined with all metal or plastic materials, and the WS2 film can be eliminated only by removing the surface layer of the substrate combined with WS2 100% lubrication of the entire mold Can be applied to grooves and holes as small as 1.5 mm Can be used for the whole mold surface, special inserts,
cavities and core materials Reduce striations and scratches on the product surface Can be applied to metal vulnerable parts and dies, prolong the service life of parts and reduce wear.
WS2 has a very low coefficient of friction and can prevent carbonization of parts treated with materials due to heat.
Copyright www.billanda.com All Rights Reserved. 沪ICP备06054649号 Powered by： 300.cn changchun.300.cn
Tel:021-61486659 61486660 Fax:021-61486662 E-mail:firstname.lastname@example.org Adress:No.198,Changjian Road,1 Bldg，Baoshan district，Shanghai，200949，China